How to Put a Sinker on the Line When Fishing Your Adventure Awaits

Make sure you have a fishing license if it’s required in your area. You can check the fishing license requirements online. Position 1 or 2 weights 1–2 ft (30–61 cm) from the hook.

The geometry of a surf sinker is similar to a pea. However, it is thicker at the bottom where it is attached to the line. Next, pull the sinker line from the knot you just tied around the sinker. Let this knot be another arrow in your fishing quiver to use the next time you need to add a little weight on your line.

Just pinch it tight enough that it doesn’t slide. If you have problems with your line breaking at that pinch point when you catch a fish, then don’t pinch the split shot as tight next time. Stick to tied weights for fishing in deep water or strong currents.

Pass the end of the line through the loop, then make a simple sheet bend knot. Wrap the second around the first at least five times, and bring both loose ends back to the middle between the two lines. Double your line to make a loop, then push the loop through the eye of your hook. You can undo a tight knot without cutting the line, but the process is difficult to do.

So the fishing line is tied on the rod properly, you need not use weights at all. You can see the bait moving smoothly and make sure that it looks like a natural occurrence and not like something that you are manipulating by using weights. In fact, some anglers use weights only to ensure that their baits stay down and do not float in the water. If you are lucky, you may not need to use a weight on your fishing line at all. After making a hole in the pellet through which the sinker is inserted, a little crimp is made to make the line flow easily through the sinker.

Learn the best way to tie a ball sinker on your line with the short video below. Instead, I recommend attaching them with a snap swivel. But you are going to need a pretty big snap to fit around all that lead.

If you practice these knots with a thin rope it is easier to see what the live end is doing as you turn and tighten the knot. I learned a number of knots in scouting as a kid, that I have used to great advantage my whole life. Wrap the loop around the hook, forming tight coils, 5 to 10 times. Thread the line through the eye of the hook, then make 5 to 7 wraps around the line with the loose end.

The line will tightly wrap around itself at the top of the ring so nothing in the water makes your weight come free. Feed the loop through the ring on the weight. Pinch the loop in your line and pull it straight through the ring on top of the weight. It’s okay if the knot slides through the ring right now. Press the fishing line into the rubber-lined groove of the sinker.

Make sure that the sinker can’t slide over and off of the swivel. If it can, then slide a stop bead onto the line before adding the swivel. Remember to use a line that’s meant for the type of water where you’re fishing.

Hold the line tight and feed it into the slot so it wraps around the line. Split shots are also easy to take on and off if you need to quickly change the weight on your line. Remove the hook and any other tackle between the end of the line and the place your sinker will go. Everything you need to start catching fish more consistently . Palomar has been my go to for over 25 years and it has never failed.

Website | + posts

Dion Liriano is a 51-year-old American zookeeper who has retired from the business. He was once a highly successful director of the Zoo and Aquarium, but he has since hung up his gloves and moved on to other ventures. Dion's passion for animals began at a young age, when he would help his father care for their family pets. This love grew exponentially when he started working at the zoo; Dion quickly became one of the most experienced keepers in the business. He credits his success to the relationships he built with both staff and animals over the years.

Leave a Reply

Your email address will not be published. Required fields are marked *