How to Make DIY Fishing Lures: A Simple Guide
If you’re making a big lure, you may wish to use bigger screws for additional strength. You may need to do this several times before you’re done. Wait for each layer to dry before painting over it. This includes darker colorings as well as features like eyes. Apply the darker paint over the base layer once it has dried. Make the lure look as realistic as possible so that fish chase after it.
Fishing Lures Catalog: How To Make a Homemade Topwater Fishing Lure http://bit.ly/c7XXgH
— zdravko lazarov (@inspirio) June 5, 2010
Afterward, thread the split rings onto the rear and bottom screw eyes. You can use split-ring pliers to pull open the split rings when connecting them to the hooks and screws. Pick closed screw eyes, which are basically screws with a hanging loop on one end. Put the threaded ends into the holes you made, then twist the screws clockwise by hand. Continue doing this until the base of the loop is about level with the wood. Once you have created the lure’s approximate shape, refine it with sandpaper.
Keep in mind that some sealers also serve as a primer, so you won’t have to use a separate primer. If you’re uncertain, apply primer so that you can be sure the paint bonds to the wood. Select a white primer to create a good base to paint over. Other primer colors may be too dark for an effective lure. This sealer layer isn’t the same as the one you add after painting the lure. Apply both to better safeguard the lure against damage.
You’ll combine the two components in a separate bowl and then either inject or pour it into the mold and heat it. The plastic molds can withstand a higher temperature than the interior fluid, so it will become hardened without damaging the mold. Cut a piece of plastic worm approximately 1″ long. It can be slightly longer or shorter than 1″, no need to be exact.
How To Make a Homemade Topwater Fishing Lure http://digg.com/u1Pv0p
— Hilary Britton (@greatdealstoday) March 11, 2010
In (0.32 cm) of wood around the pattern so you don’t inadvertently make the lure too small. If you’re unfamiliar with making your own lures, you can’t go wrong by sticking to a safe choice like balsa or pine. That way, you can make adjustments according to your style and what you encounter on the water. Lure building is fun because you have the flexibility and freedom to design them how you like.
If the lure seems too light, you may have to add a modification for more weight. When the clear coat has dried for a day, its time to add some hardware. Third, drill one hole on each end of the long side of the spoon. Second, measure your wood to be 5″ long by 4″ wide—Mark where you will cut the wood with a pencil. First, obtain a nice piece of softwood (i.e., balsa or pine). The wood needs to be larger than 7″ long and 6″ wide.
Wear a dust mask, safety goggles, and other protective gear while using them. If your lure pulls to one side when you retrieve it, bend the front screw eye in the opposite direction. That depends on where you’re at and also the amount of brightness. In saltwater, you want to use patterns that can attract attention to something brighter. Home improvement stores and lumber retailers carry all sorts of wood.
Dion Liriano is a 51-year-old American zookeeper who has retired from the business. He was once a highly successful director of the Zoo and Aquarium, but he has since hung up his gloves and moved on to other ventures. Dion's passion for animals began at a young age, when he would help his father care for their family pets. This love grew exponentially when he started working at the zoo; Dion quickly became one of the most experienced keepers in the business. He credits his success to the relationships he built with both staff and animals over the years.